Home Tablet

Drill Base Tablet Mount | Vehicle and Wall Mountable | 7" Modular Arm | Enduro Series | iPad Compatible

$49.99

• Info
• Video

• ABOUT US - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. Our Enterprise Series products are here to serve many industries including Commercial Fleet Trucking, Aviation, Agriculture, Off-Roading and Overlanding to name a few. Tackform’s Enterprise Series products are backed by a 3 year warranty.

  DEVICE COMPATIBILITY - Be ELD Compliant. This will hold it all. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". To name a few, this includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4 and Tablet Z… oh yeah, it also holds the Microsoft Surface Pro and Nintendo Switch! The deep grips will also accommodate your tablet regardless the size of your case.

  INSTALLATION - AMPS Mounting plate allows a for quick semi permanent installation for any flat surface (screws not included). We understand there is no one size fits all solution. With TRUCK DRIVERS we developed a solution that will accommodate a wide range of vehicles. Important: Use caution and consult a mobile install professional to avoid drilling into any highly sensitive components.

  MOUNTING POSITION VERSATILITY - Between the suction cup and the cradle is our modular arm with a hardened aluminum ball connector at each end allowing two connectors a full range of motion in addition to the locking elbow joint in between them. This metal arm configuration allows easy repositioning, along with a ROCK SOLID, vibration free hold.

  QUALITY ASSURANCE - Tackform Enterprise Series products are reliability tested to ensure the product will withstand conditions such as vibration, temperature, humidity, extreme heat and extreme cold.

  INDUSTRIES SERVED - Commercial Fleet Trucking, Aviation, Agriculture, Off-Roading, and Overlanding to name a few.

Tablet Mount for Elliptical, Spin Bike, and Indoor Training Bikes | Dual Lock | iPad Compatible

$24.99

SIMPLE and FAST – Our Tablet Holder Bar Mount for iPad or any tablet can firmly clamp onto any bar in your workout area (15mm–38mm...

Tablet Holder for Treadmill or Exercise Bike | Quick Clamp | Great for Spin Bikes and Indoor Trainers | iPad Compatible

$29.99

• Info
• Video

• SIMPLE and FAST – Our Tablet Holder Bar Mount for iPad or any tablet can firmly clamp onto any bar in your workout area (15mm–38mm or 0.6–1.5 inches). Treadmill, Elliptical, Stationary Bike, etc. Just clamp it on, slide your tablet into the universal cradle, and you’re ready to rock.

  DEVICE COMPATIBILITY - This will hold it all. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". To name a few, this includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4 Tablet, Nintendo Switch, Surface Pro

  VERSATILE ROCK STEADY CLAMP – The mounting bracket is made from Automotive Grade ABS plastic. The rubber grip and grooves inside the strap allow the clamp to firmly hold onto the bar and remain secure (even if you’re running like a madman on the treadmill, we promise it won’t bounce off!) Super rugged for withstanding high impact workouts. It has a rock solid hold on bars and posts ranging from .6” to 1.5”

  FAST & EASY – Excellent solution for Peloton Users! Takes mere seconds to install. The legs of the tablet cradle allow for FULL access to ports and buttons and camera. Tackform stands behind this product with a 100% Satisfaction Guaranteed.

  ABOUT US - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions.

Tablet Holder for Desk or Microphone Stand | 7" Modular Arm | Enduro Series | iPad Compatible

$59.99

• Info
• Video

• FLEXIBLE and FUNCTIONAL - This Tablet Mount for iPad, or any tablet, will clamp to a number of surfaces. It works great for a Music stand, as a bedside mount or on any table, desk or bar. Once clamped on to any flat (2” max) or round (1.25” max) object, adjust the 3-way, heavy duty arm to your PERFECT viewing angle.

  DEVICE COMPATIBILITY - This will hold it all. The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". To name a few, this includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4 Tablet, Nintendo Switch, Surface Pro

  VERSATILE HEAVY DUTY CLAMP – This all aluminum clamp is notched to accommodate a bar, pole or rod, in addition to being able to mount to a table, desk or any flat surface under 2” thick. A 3-way all aluminum arm securely attaches the clamp to an Automotive Grade ABS plastic tablet cradle. The rubber grip and grooves inside the cradle arms won’t damage your tablet, as it securely holds it. Whether it’s holding your tablet onto your Mic Stand, Drums, Treadmill or even on the workbench in the garage, you can be sure that you’re tablet is safe and secure.

  SAFE and SECURE – Excellent hands-free solution for musicians, woodworkers, fitness fanatics, or if you’re just reading a book in bed. It takes mere seconds to install or remove. Sliding cradle legs allow for FULL access to ports, buttons and camera.

  WHY PURCHASE FROM TACKFORM - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. This product is backed by TACKFORM’S 100% bulletproof satisfaction guaranteed.

Tablet Holder for Treadmill, Spin Bike, Elliptical | Zip Tight | iPad Compatible

$24.99

• Info
• Video

• SIMPLE and FAST – Our Tablet Holder Bar Mount for iPad or any tablet can firmly clamp onto any bar in your workout area (15mm–50mm or 0.6–2.0 inches). Treadmill, Elliptical, Stationary Bike, etc. Just Zip-tie it on, slide your tablet into the universal cradle, and you’re ready to rock.

  ADJUSTABLE – Ball joint easily swivels 360 degrees in case you need to adjust your viewing position.

  VERSATILE & HIGH DURABILITY – The mounting bracket is made from Automotive Grade ABS plastic. The rubber grip and grooves inside the strap allow the clamp to firmly hold onto the bar and remain secure (even if you’re running like a madman on the treadmill, we promise it won’t bounce off!) Super rugged for withstanding high impact workouts.

  FAST & EASY – Excellent solution for Peloton Users! Takes mere seconds to install. The legs of the tablet cradle allow for FULL access to ports and buttons and camera.

  100% WARRANTY – Tackform Solutions a family-owned, American company. We stand behind each one of our products with a 100% Lifetime Warranty. That’s how we believe business should be done, period.

  Compability

  The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". We understand that even though this product is designed to be universal for tablets you may want to know how well it will work specifically with your exercise machine, your tablet, or your tablet case. Don't hesitate to reach out to us and we'll research your specific setup for you and respond back.

   

  Just let us know the make and model of your bike, phone, phone case, and we'll do the rest of the work for you.

   

  Thanks in advance for your continued support!

   

Tablet Holder for Desk or Workbench | Industrial 12" Gooseneck | Heavy Duty | iPad Compatible

$39.99

• Overview
• Compatibility
• Installation

• Looking for an iPad or Tablet holder for you vehicle? Look no further. Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. Our Enterprise Series products are here to serve many industries including Commercial Fleet Trucking, Aviation, Agriculture, Off-Roading and Overlanding to name a few. Tackform’s Enterprise Series products are backed by a bulletproof 3 year warranty.
  
  

• DEVICE COMPATIBILITY - The tablet cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". To name a few, this includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4 and Tablet Z… oh yeah, it also holds the Microsoft Surface Pro and Nintendo Switch! The deep grips will also accommodate your tablet regardless the size of your case.
  
  

• SIMPLE AND VERSATILE - Easily adjust to c-clamp can securely grab objects up to 2.25 Inches wide. This Aluminum 12” Gooseneck allows you to position the mount at a great viewing angle while still providing a secure and stiff mounting arm.

  QUALITY ASSURANCE - Tackform Enterprise Series products are reliability tested to ensure the product will withstand conditions such as vibration, temperature, humidity, extreme heat and extreme cold.

  MORE QUESTIONS? Please Ask. If there’s any additional information you’re looking for that isn’t listed please contact us.

   

Tablet Mount for Tripod - TACKFORM [Enduro Series] - All Metal Arm - Automotive Grade ABS Spring Loaded Cradle - 1/4"x20 screw thread - Compatible with iPad, Galaxy and more. Commercial Grade Parts

$49.99

• Information
• Video

• STANDARD TRIPOD SCREW - Utilizing a 1/4"x20 screw allows endless possibilities. This will mount to anything you can mount a standard camera to. Whether it's a dolly, sliders, tripods, gimbals, cranes, etc., this mount can attach to them all. Now you can use your tablet's camera and quickly edit your photos and videos right on the tablet! No more small phone screens or transferring files around.

   

  DEVICE COMPATIBILITY - The commercial spring loaded cradle will accommodate any tablet with a screen size between 7" and 18.4", or a tablet with a width between 6.25" and 11.5". This includes the Apple iPad Pro 12.9, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, LG G Pad 10.1, Sony Xperia Tablet Z4, Surface Pro and Nintendo Switch.

   

  THE MOST ADJUSTABLE SOLUTION OUT THERE - This device cradle will keep you devices positioned safe and securely from a wide variety of mounting positions. Equipped with dual 360 degree rotating locking ball joints as well as a locking elbow joint. You can securely mount your tablet high, low, side to side for the perfect viewing angle.

   

  ENDLESS POSSIBILITIES - Use your tablet for photography, videography, vlogging. Musicians can view their sheet music or lyrics. Use it as a teleprompter for a speech. Set it up at a wedding for a quick and easy photo booth. Take unlimited selfies until you get it perfect! Adjust it to the perfect drawing position for tablet artists.

   

   

  WHY PURCHASE FROM TACKFORM - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. This product is backed by TACKFORM’S 100% bulletproof satisfaction guaranteed.