The Tackform Enduro Mount for Action Cameras is a heavy-duty solution for mounting various action cameras to flat or round surfaces. The adapter allows this to work with a slew of other devices that use the 2 prong compatible system. The adapter is also removable which exposes a standard tripod screw! The tripod (1/4-20) screw is an industry-standard and isn't limited to cameras. Any device that accommodates that screw will work on this mount! Finally, two omnidirectional ball heads, as well as two locking elbows, allow for infinite adjustment to suit your specific needs!
WHY PURCHASE FROM TACKFORM - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short-lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. This product is backed by TACKFORM’S 100% BULLETPROOF SATISFACTION GUARANTEE.
HEAVY-DUTY CLAMP – Designed to hold a bar, pole or rod up to 1.25" or attach to any flat surface under 1 5/8" thick. All aluminum construction. Easily tightens/loosens with an ergonomic knob.
ROCK SOLID ADJUSTABLE ARM - An all-aluminum arm equipped with dual Omni-directional locking ball joints and two locking elbow joints allow for the perfect filming angle. Arm length between ball joints is 10.75".
VERSATILE CAMERA MOUNT - Fully articulating, CNC machined, aluminum, camera mount with familiar two to three-prong adapter.
COMPATIBLE WITH GOPRO - This mount works great with any device using the prong system and can also be used with any device which uses a standard "tripod" screw (1/4-20). This includes, but isn't limited to "Point and Shoot", Mirrorless, Micro 4/3 and many of the most popular action cameras!
This mount can securely clamp to any headrest posts measuring from 3/8" to 1/2" in diameter. Included allen key tool allows for the clamp to be securely locked to the post. The arms and ball heads can be securely locked with the twist of a nut and the camera mounting screw has a convenient locking thumb screw to make sure that your camera is safe and secure. The adapter, once connected and tightened with the thumbscrew, is ready to receive any GoPro style device using the 3 prong attachment. When fully extended, the mount measures 10.75" from ball to ball. The tripod screw (1/4-20) works especially well with all types of cameras such as point and shoots, mirrorless, micro 4/3 as well as many popular action cameras.
1. Using the included Allen key, loosen the screws on the headrest clamp to remove the clamp plate.
2. Raise the headrest, if needed, and place the headrest clamp around the post at your desired height.
3. For best results, finger tighten all 4 screws and then use the included Allen key to tighten the 4 screws.
4. Loosen the screws for the arm and move it to your desired position.
5. Attach the GoPro adapter by aligning the screw hole with the screw on the mount and then tighten securely.
Always support your device's weight when adjusting the arms! Ideally, adjust your arms to the desired location before placing your device on.
It has been many years since I viewed such high quality in all aspects of this product. Clearly not like products from china which are rough, poorly finished and built with limited design specs. An absolutely exceptional product in all aspects. What a pleasure to receive such a high-quality product as well as equally high functionality.
Table Clamp / Headrest Mount for GoPro and Other Action Cameras | 10.75" Long Modular Arm | Enduro Series