Tackform Enduro Spring Tight Phone Cradle 20mm

Tackform Enduro Spring Tight Phone Cradle Heavy Duty

Tackform Enduro Spring Tight Phone Cradle Holds Devices

Tackform Enduro Spring Tight Phone Cradle 20mm 2

TF-HL-20

Phone Cradle | 20mm Ball Connection | Spring Loaded Cradle | Enduro Series

$29.99

Tackform's Enduro Phone Cradle with 20MM ball. The secure grip allow you easily get the phone in and out with a single hand. Works seamlessly with all cell phones and devices up to 3.4 inches wide.

Built to outlast you.

Customer Reviews

Based on 2 reviews Write a review

RC51 Visor Stay Bolt Mount

My request was not for a shelf item yet Tom went above and beyond putting my combination of parts together. My phone mount delivered as if it were a stock item, neatly packaged in a very professional manner and works perfectly. My recommendation is, even if you don’t see exactly what you think will work for your vehicle, call Tom and he’ll figure it out for you. I am impressed with the product and serviced received and highly recommend Tackform's products

Phone Cradle | 20mm Ball Connection | Spring Loaded Cradle | Enduro Series

Thinking the best

Best products and customer service is the best I've encountered...period.

Phone cradel and arm

I bought a Jeep last month that had a plastic RAM setup. The owner kept the arm and cradle but left the ball mounted to the dash. I shopped online to utilize it and saw many plastic pieces. I was impressed by Tackform's billet material and made in USA. When they arrived they were quality pieces. They held my phone well without movement even over rocky trails. When I turned the cradle 90 degrees to go from map usage to video it again held it firmly. I'm very happy with them.

A+ quality and service

After much research reading reviews and watching video's I decided on Tackform, Products are high quality and Nick in customer service was awesome as he really know his products !! My application was on a 2016 road glide ultra using the Arkon mount and using the bar mount suggested by Nick, it works perfect and its so solid I can't imagine it falling out. The genuine house brand (Tackform) works equally as well if not better and holds my girlfriends phone just as solid.

Thank you Tackform and would recommend you anytime.

A+ Parts and Support

I bought parts to mount to my Yamaha YZF-R6 and Nick was great at helping me through it. They didn't have a set pre-made, so he took the time to get everything I needed and this was one of the parts. It is very sturdy, nice looking on the bike and performs excellent due tk the all metal construction.

I would totally recommend!

Great Product

I have loved this since I bought it. The replacement was even stronger then the original. The ball size was supposed to be able to fit the competitors product and was the wrong one however I used my old one and it’s just fine now. Would Highly recommend. Customer service was great as well.

Phone Cradle | 20mm Ball Connection | Spring Loaded Cradle | Enduro Series

Great Quality and Price Point

I recently purchased the Vector Off-Road e-dock for my Jeep JKU and needed to find the right holders for my electronics that were compatible with the Vector bar and were also of superior quality as well as being affordable. This product is the perfect mix of all of those things. I'm so glad I found Tackform!

Great Mount

This is a great mount but even more so a great company. I had an issue that was totally my own doing and they stepped up and replaced the product. I can't say enough about the customer service I received from Tackform. Stand up companies are rare these days but these guys came through for me.

1 2 3

Great mount

This is a great mount. It fits the KST Spearhead bars that I just installed on my 19 Road Glide Special perfectly. I’ve used RAM mounts before but this is the way to go.

Great product

No problems at all easy install and holds up well we have it for the GO pro and for the cellphone.

Impressive Phone Mount!!!

Very well made. I’m honestly really impressed how strong the clamping force is. I went on about a 300 mile ride the day after I installed it. Most of the roads were rough and the phone never budged. I mounted it to my handle bars, it’s small, discreet, and looks awesome which I love. Great customer service and quick shipping.

Best Phone / Camera Mount Available

Just had race seats and a harness bar installed in my 2009 Corvette Z06. Unfortunately, the SharkBar is no longer made with a camera mount. I went online and bought a windshield mount for my phone but the auction was so bad it kept falling off the windshield. Since the SharkBar is 1.5” diameter many commonly offered bicycle mounts don’t fit - they max our at 1.25”. The Tackform mount fits perfectly!

Features I like: the black anodized finish matches my harness bar. It’s not bulky and gives good visibility while driving. The spring-release grip holds my heavy iPhone 6S Plus w/ battery case Securely! I like that Tackform includes 3M tape so it doesn’t scratch the bar it’s mounted to, and doesn’t spin while attached. And it’s made in USA!

Things I would change: firstly I think they should offer the screws matching black anodized finish. The hex wrench is too short and hard to use, the neck needs to be longer.

Otherwise, I recommend this product!

Very nice

I mounted this on my bars, holds my iPhone11 and case perfectly. When the phone is off it just blends in with the bike. Not that it doesn’t look nice it just looks like it should be there!

Tackform enduro series

After looking at all my buddies phone mounts I went with the tackform mount. So far I’m very happy with the quality of it and sturdiness it’s a solid mount. Thanks tackform for a great product and customer service.

A mount with the rugged looks & gusto to back it up.

Not only does this mount look good on my DarkHorse it backs it up with the hold required of todays demands. No wimpy mount here, this not a boys mount this is a man's stealth containment smart phone accessory.

Sportster mount

Quality mount just like they advertise. I really like it, l use the extra safety band because I’m a bit of a worry freak but i don’t think you need it very strong!

Well worth the money

Well worth the money
All metal solid construction. Very well-made Holds phone great. Very discreet on the bike.I’ve looked at a bunch this is my far the best one I’ve seen yet. I would definitely recommend it. And on top of that the customer service is exceptional great people. Not only did they help me out with questions But I actually talk to the guy for a while. Not just some random person on the phone - with the guy that owns it. Doesn’t get any better than that

Works awesome, ty :)

Best Mount Ever

I got this for my old Harley Wide Glide and it works great. Is very sturdy and holds much Samsung S10+ with Otter Box case very tightly, just fine without the little security strap thingy. Much better than my friends cheap plastic junk on his bike lol. Made him jealous. But I love it and is nice to see my Google maps now while I'm riding. Thanks Tack Form for a great product!

phone mount

Great product. Installed on my 2014 Indian Chieftain and its worry free. Took ride and never had to worry about phone. Adjusts to any position.

Triumph Rocket 3 TFC & Yamaha MT 10

I purchased two standard phone holders. One for my Rocket & the other for my son’s MT 10. Tackform has delivered the goods! High quality product that is very easy to install and adjust. The phone securely attaches and detaches with one hand in just a couple seconds. We ride fairly aggressively and the phones stay 100% in place and no vibration transfer. Now I’m going to purchase two more. One for my BMW Grand America and one for my KTM 1290 SA. Great product at a fair price!

Well built and stylish

This holder is well built the spring holder is vary strong I was surprised.

Phone Cradle | 20mm Ball Connection | Spring Loaded Cradle | Enduro Series

Customer Reviews

Customer Reviews

Related Items

Verified Customer Reviews

Customer Reviews