---

 

Holder Compatibility	Smartphones with a minimum width of 2.5" and a maximum width of 3.6"
Arm Length	4.75", 7"
Base	Mount to solid flat surfaces and standard AMPS screw pattern

 

Metal Car Phone Holder

PLEASE READ: DUE TO THE LARGE ARRAY OF MOUNTING APPLICATIONS FOR THIS PRODUCT WE DO NOT INCLUDE MOUNTING HARDWARE.

➕ Enduro Series™
The Tackform Enduro Series™ is a 20mm aluminum ball and socket mounting system. The all-metal ball and socket connection offers a slip-free, lower profile, connection compared to the 1" rubber ball and socket system. 

➕ Dual Socket Modular Arm
Dual articulating ball and socket arm, features a locking elbow joint for perfect positioning.  The Modular arm also works with our 3.5" arm extension.

➕ AMPS Mounting 
This drill base can be mounted to anything with a standard AMPS screw pattern, and surfaces such as dashboards and workbenches. The AMPS Mounting Base consists of a industry standard 38mm x 30mm hole pattern. 

➕ Tomahawk Phone Cradle 

1. ADJUSTABLE SPRING TENSION - This cradle has adjustable spring tension which allows you in increase or decrease the grip strength on your device. This also allows for easy single-handed insertion and removal of the phone, regardless of how narrow or wide it is. 
2. INJECTION MOLDED GRIPS - You'll notice many of the metal cradles out on the market have rubber grips adhered to the inside of the cradle, which can, and will, peel off in high heat. This is a common issue with many of the competitor products. You don't have to worry about that with this cradle.  Our grips are injection molded and clip into the cradle for a fail-proof design that will last a lifetime. 
3. DEEPER GRIPS - Our patent-pending Tomahawk® cradle features grips that are .6" deep. This accommodates most phone cases, even the big protective cases such as Otterbox Defenders and credit card style cases. 
4. BETTER BUILT - We've reviewed all "like" holders on the market and we'll flat out say, this is built better. For starters, these style phone holders have pins that run through the housing to support the spring-loaded grip.  We use 4 Pins that are stainless steel, and a large 5mm in diameter.
   The competitors are only using 2 pins, and some measured as small as 2mm in diameter, which is a lower cost/lower quality alternative.
   We'll say it one more time. The Tomahawk is built better.
   
5. PHONE COMPATIBILITY - This cradle will accommodate all phones between 2.5" and 3.6" wide and up to .6" Thick