TFEN-M11AR17-SPR-RT

Enduro Series™ Can-Am Spyder Phone Mount | Short Reach Arm | 11mm Pinch Bolt Mount with 1" (25mm) Rubber Ball

UNLIMITED OPTIONS - Cramped handlebars? Struggling to find somewhere to get your phone mount installed? Are you riding something unique like the Can-Am Spyder RT?  There are a lot of bikes out there that won't allow any of the more traditional mounts to be installed. However, this innovative design allows you to remove one of your 10mm handlebar bolts and replace it with a longer (included) M10 bolt with a bushing and an aluminum bolt head adapter that has a 1" rubber ball. Use this mount to put your phone in the perfect position on your bike.

Hardware included with this kit is designed for the following Spyder Models.

F3 (All Models)

RS Models (2013 and newer only)

ST without Tri-Axis Handlebars or Factory GPS

RT without Tri-Axis Handlebars or Factory GPS

LOW PROFILE - Compact metal coupler arm provides solid support while minimizing vibration. Thumbscrew allows you to quickly loosen/tighten the ball and socket joint to allow unlimited positioning. This arm will not break, bend or boogie on you. It will stay right where you left it.

METAL OMNI-DIRECTIONAL PHONE CRADLE - Works seamlessly with all cell phones and devices up to 3.4 inches wide. This includes all standard and plus-sized phones from all manufacturers. Clever design allows you to get any phone, with any case, in and out of the cradle with a single hand. Metal construction with rubber inserts to protect your phone paired with industrial springs to hold your phone securely. Full articulation allows for your camera to be a portrait, landscape or anywhere in between.

COMMON USES - The most common use is to replace one of the bolts from the handlebar clamp. Typical clamps have 4 bolts allowing you to place this mount in a variety of positions.

WHY PURCHASE FROM TACKFORM - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short-lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. This product is backed by TACKFORM’S 100% BULLETPROOF SATISFACTION GUARANTEE.

MUST READ NOTES: The ball on the pinch bolt is a 1" rubber ball. The ball connected to the phone cradle is a 20mm aluminum ball. The connecting arm that spans from the pinch bolt base to the cradle has a 20mm coupler on one end and a 1" coupler on the other.

Customer Reviews

Based on 21 reviews
95%
(20)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
C
C.M.
Phone holder for CanAm 2019 GT

Very happy with it and great quality!!

J
J.L.
Highly recommended

Love the phone mount. Very high quality

R
R.C.
Great phone holder.

Holds phone on my Can am Spyder st-s in just the right position. This thing holds with a firm grip, not to tight but just tight enough. I would definitely recommend it.

G
G.W.
Great phone mount

Yes, I purchased this product about four weeks ago. This product is great, it's construction is super strong and well designed. It looks great on my Can Am SPYDER. Thanks TackForm

J
J.C.
Mount

Great product works good so far

A
A.
Great phone holder

Sturdy well made phone holder. Dealership had to crack the bolt to get it out because of the way it’s held in the cam am, but then we drilled this one in and it’s well made and sturdy. I’m very pleased with the positioning and sturdiness of the holder

D
D.B.
New motorcycle

Easy to install. Seems to be doing great.

H
H.
Great phone holder for my Can Am Spyder limited

Very easy to install once you get the appropriate metric hex wrench. My samsung note phone sits perfectly and securely. Highly recommended.

T
T.
Great Product

I am enjoying using this product to see and manipulate my phone easily.

s
s.m.
Awesome mount

Installed on my can am rt limited. Works perfectly and as advertised . Very happy with your product.

★ REVIEWS ★

Verified Customer Reviews

2583 reviews
95%
(2461)
3%
(88)
1%
(20)
0%
(7)
0%
(7)
Built like a tank

This is pretty solid as it comes with an all metal arm and cradle w/industrial springs to secure your phone. Its a one handed solution for placing your phone. That’s an IphoneX w/otterbox defender case and that thing is not going anywhere. Stay away from the cheap Amazon phone mounts and invest your money on this setup you will not regret it. Money well spent love this phone mount. 👌

The Real Deal

I’ve been riding with the handlebar mount Tackform for 3 weeks and it is amazing. It’s easy to mount, handles high speeds and looks great. It’s the Real Deal!

Regards,
Randy

Just what I was looking for

I was looking for a mount for my Garmin Drive smart 55 with Traffic and did not want to mount it on the windshield. I could not find a cup holder mount that would work because they are all made for Smart Phones.
Working with Nick at Tackform he added a cup holder to the spring form mount which allowed for a secure fit for the 3/4 inch unit and allowed for the Cable to be used which is necessary for GPS units!! It was the perfect solution and just what I was looking for!! — Bill G. - Melrose MA

Good Solution for Mounting a Tablet Computer

Overall I am pleased with this purchase. I have been researching methods to mount a tablet computer inside of my teardrop camper for a while now. I selected the TFEP-AM2AR12-TAB mount with dual-arms for the positioning flexibility as I wanted to attach the mount to the underside of the camper's cabin wood cabinets.

Initial observation; quality of the hardware appears to be good; manufacturing appears to be good; excellent communications by the seller; quick shipping. I will say that the mount can be a bit cumbersome to position with one tightening thumbscrew for two ball-joints, kind-of-a wet-noodle…but I was able to position for optimal viewing with a little patience. First deployment with this new accessory to my teardrop camper is mid-March 2020, time will tell the durability and reliability story…

I don’t plan on traveling with the tablet computer in the mount. No need for me to challenge the mount during transit and potentially damage the tablet computer, I will only clamp the tablet into the mount when the camper is parked. The mount seems to be sturdy enough; although it does flex with the weight of the Microsoft Surface Pro 4 tablet computer installed but not a deal-breaker.

The tablet computer weighs 1lb 11oz. and is 11.5-inch (W) x 8-inch (H). The mount holds the tablet computer securely using two short and two medium clamp-legs. In my application, I drilled through holes and used #10-32 machine screws with nylon insert lock-nuts to attach the mount to the camper's cabin wood cabinets.

I highly recommend this mount…

Worked Great!

Used this with a rubber coated magnet as the base for my phone mount in my '81 Toyota FJ40 Landcruiser.