Enduro Series™ Motorcycle GoPro Mount | 3.5" Arm | For Crossbar Brace, Mirror, and other posts up to .5" in Diameter | All Metal Design

This mount can securely clamp to any headrest posts measuring from 3/8" to 1/2" in diameter. Included allen key tool allows for the clamp to be securely locked to the post. The arms and ball heads can be securely locked with the twist of a nut and the camera mounting screw has a convenient locking thumb screw to make sure that your camera is safe and secure. When fully extended, the mount measures 10.75" from ball to ball. The tripod (1/4-20) works especially well with all types of cameras such as point and shoots, mirrorless, micro 4/3 as well as many popular action cameras.

1. Using the included allen key, loosen the screws on the headrest clamp to remove the clamp plate.

2. Raise the headrest, if needed, and place the headrest clamp around the post at your desired height.

3. For best results, finger tighten all 4 screws and then use the included allen key to tighten the 4 screws.

4. Loosen the screws for the arm and move it to your desired position.

5. Align your camera's, or other device's, tripod hole with the screw on the mount and use the thumbscrew to securely tighten it

Always support your device's weight when adjusting the arms! Ideally, adjust your arms to the desired location before placing your device on.

This mount can securely clamp to any headrest posts measuring from 3/8" to 1/2" in diameter. Included allen key tool allows for the clamp to be securely locked to the post. The arms and ball heads can be securely locked with the twist of a nut and the camera mounting screw has a convenient locking thumb screw to make sure that your camera is safe and secure. The adapter, once connected and tightened with the thumbscrew, is ready to receive any GoPro style device using the 3 prong attachment. When fully extended, the mount measures 10.75" from ball to ball. The tripod screw (1/4-20) works especially well with all types of cameras such as point and shoots, mirrorless, micro 4/3 as well as many popular action cameras.

1. Using the included allen key, loosen the screws on the headrest clamp to remove the clamp plate.

2. Raise the headrest, if needed, and place the headrest clamp around the post at your desired height.

3. For best results, finger tighten all 4 screws and then use the included allen key to tighten the 4 screws.

4. Loosen the screws for the arm and move it to your desired position.

5. Attach the GoPro adapter by aligning the screw hole with the screw on the mount and then tighten securely.

Always support your device's weight when adjusting the arms! Ideally, adjust your arms to the desired location before placing your device on.