Skip to product information
  • Jeep Wrangler 4XE Dashboard Phone and Tablet Mount
1 of 5
SKU: FT08

Jeep Dashboard Center Bracket - 4XE (P/N FT08)

Regular price
$59.99 USD
Regular price
$79.99 USD
Sale price
$59.99 USD

➕ Tackform Fast Track System
➕ Phone and Tablet Dash Mount Bracket for Jeep Wrangler 4XE
➕ Up to 2 AMPS Base Mounts
➕ Up to 5 Diamond Base Mount
➕ UP to 6 Fast Track Base Mounts

-------

Jeep Compatibility   Jeep Wrangler 4XE
Material Steel
Weight 32 oz

FT03 Installation Instructions. ( NO DRILLING NECESSARY ) - INSTALLATION THE SAME ON 4XE

1. Remove the rubber mat from the dash tray.
2. Remove the two OEM Screws on the left and right side of the dash tray.
3. Place one mounting base bracket on each side of the dash tray and re-insert the OEM screw in it's original location to secure the base bracket in place.
4. Install the top mounting plate to the two base brackets.
5. Add your accessories. 6. Go on an Adventure.

 

Jeep Wrangler 4XE Phone Mount and Tablet Dashboard Mount

This Fast Track™ device dash mount is built for Jeep 4XE Wranglers. The heart of the system is our steel bracket which is laser cut and powder-coated black for a seamless OEM look.

This drill-free option mounts to your dash using the factory screws, so no modification is necessary. The dash mount has five industry-standard AMPS hole pattern mounting locations. In addition, it has two sections of Tackform’s Fast Track mounting slot.

The two different mounting options allow you to fully customize the device layout of your vehicle. We have a variety of pre-built kits that are ready to attach to this bracket as well as over 50 different components that can be mixed and matched for a fully customized setup.

  

Tomahawk Phone Cradle

Tackform Tomahawk Phone Cradle for Car

The Tomahawk Phone Holder is hands down the best spring-loaded cradle on the market. Here are a few reasons why.

  1. ADJUSTABLE SPRING TENSION - This cradle has adjustable spring tension which allows you to increase or decrease the grip strength on your device. This also allows for easy single-handed insertion and removal of the phone, regardless of how narrow or wide it is. 
  2. INJECTION MOLDED GRIPS - You'll notice many of the metal cradles out on the market have rubber grips adhered to the inside of the cradle, which can, and will, peel off in high heat. This is a common issue with many of the competitor products. You don't have to worry about that with this cradle.  Our grips are injection molded and clip into the cradle for a fail-proof design that will last a lifetime.
  3. DEEPER GRIPS - Our patent-pending Tomahawk® cradle features grips that are .6" deep. This accommodates most phone cases, even the big protective cases such as Otterbox Defenders and credit card style cases. 
  4. BETTER BUILT - We've reviewed all "like" holders on the market and we'll flat out say, this is built better. For starters, these style phone holders have pins that run through the housing to support the spring-loaded grip.  We use 4 Pins that are stainless steel, and a large 5mm in diameter. The competitors are only using 2 pins, and some measured as small as 2mm in diameter, which is a lower cost/lower quality alternative. We'll say it one more time. The Tomahawk is built better.
  5. PHONE COMPATIBILITY - This cradle will accommodate all phones between 2.5" and 3.6" wide and up to .6" Thick



Wireless Charger Phone Cradle

Wireless Qi Charger & Phone Holder

There's a lot of options out there for wireless chargers but here are a few features that sets us apart,

  1. THE SMART SENSOR - This product is equipped with a smart sensor and here is how it works. The arms start in the open position. Once a phone is inserted the smart sensor will detect it and the arms will automatically close, and your phone will begin to charge. When you want to remove your device you simply press the side button on the cradle and the arms open back up, and remain in that position until you re-insert your phone.
  2. FAST USB CHARGER INCLUDED - Our Wireless Charger comes with a Qualcomm Quick Charge 3.0 Fast USB Charger.
  3. FOREIGN OBJECT DETECTION - This safety feature detects metal objects in or on the phone case that can lead to overheating. One classic example is when people try to use a wireless charger but still have a metal plate in the back of the phone that may have been used in the past for magnetic mounting.
  4. PHONE COMPATIBILITY - This cradle will accommodate all phones between 2-5/8" to 3-7/8 wide and up to .75" Thick



Magnetic Phone Cradle

Tackform Tomahawk Phone Cradle for Car

Compact magnetic mount for cars and trucks

  1. STRONG MAGNETS - The strong neodymium magnets will hold your device securly in most driving condetions.
  2. SINGLE HANDED OPERATION - Very easy to use and get your phone on and off the holder with a single hand.
  3. PHONE COMPATIBILITY - Compatible with most phones, you can adhere the metal plate directly to the back of your phone or to any hard phone case. The plate doesn't adhere to silicon or soft cases, and it may interfere with your phone's magnetic charging if your phone has that feature.
  4. USABILITY - Great for most driving conditions, not recommended for off-roading, or rough terrain.



Tablet Mount

Tackform Tablet Holder

The Tackform Tablet Spring Cradle is a super universal and reliable tablet mount holder in both commercial environments, off-road ( in vehicle ) as well as for regular commuting.

  1. COMPATIBILITY - When purchasing a tablet for yourself or your fleet it’s important to know that your purchase will work with every, single, tablet. This unique spring housing design is one of the few options on the market that will hold just about any tablet out there. This includes devices with screen sizes from 7” to 18.5”. We accomplish this by bundling our spring cradle with 10 support grips to accommodate different-sized devices. The spring-loaded cradle opens a minimum of 6.25” to a max of 11.5” wide. ( For reference, an iPad 12.9 is only 8.46 on its short side and 11.04 when measured lengthwise.)
  2. DEEP GRIPS - Finding a tablet mount to fit your device is one thing, finding a tablet mount to work with your large protective case is another. Our grips are over 1.25” deep making this work with most all tablet cases out there, even large protective cases such as the Otterbox Defender.
  3. SUPERIOR CRADLE TO ARM CONNECTION - Our Tablet Mount has an industry-standard hole pattern on the back of it. This connection type is far superior to the competitors' tablet holders that connect to the mounting arm using a Dual-T (2T) Type of connection that is prone to failure.
  4. AUTOMOTIVE GRADE ABS - Not all plastics are created equal. We use automotive grade ABS plastic which has an additive that protects the product from breaking down from UV. (sunlight)



Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)