FT02

Fast Track™ Console Device AMPS Bracket | Ford Super Duty - 3rd Gen (2011 to 2016) Bracket Only - NOT Compatible with Split Bench - (P/N FT02)

➕ Tool-Less Installation Console Bracket
⛔️ Not compatible with split-bench





Free Shipping
Fast
Shipping
On all orders
Easy Return
30-Day
Money Back
Guarantee
Easy Return
Lifetime
Warranty
Guaranteed
* Order by 2:00 PM CST ships same business day from Chicago

 

Mount Vehicle Compatibility Super Duty - 3rd Gen (2011 to 2016)
AMPS Compatible Yes, attaches up to 4 AMPS bases
Fast Track Compatible Yes
Weight 2.3 lb

  

 

➕ Tool-Less Installation Console Bracket
Simply remove the factory cupholder by lifting the center and insert our console bracket in its place.

⛔️ Not compatible with split-bench
The bracket only works with a center console.


The Fast Track device mounting system for Ford Super Duty - 3rd Gen (2011 to 2016). The heart of the system is our steel bracket which is powder-coated black for a seamless OEM look.

The innovation comes in the form of two different mounting options. First, it offers five industry-standard AMPS hole pattern mounting locations. In addition, it has two sections of Tackform’s Fast Track mounting slot.

The two different mounting options allow you to fully customize the accessory and device layout of your vehicle. We have a variety of pre-built kits that are ready to attach to this bracket as well as over 50 different components that can be mixed and matched for a fully customized setup.

 

 

Wireless Qi Charger & Phone Holder

There's a lot of options out there for wireless chargers but here are a few features that set's us apart,

  1. THE SMART SENSOR - This product is equipped with a smart sensor and here is how it works. The arms start in the open position. Once a phone is inserted the smart sensor will detect it and the arms will automatically close, and your phone will begin to charge. When you want to remove your device you simply press the side button on the cradle and the arms open back up, and remain in that position until you re-insert your phone. 
  2. THE POWER CAPACITOR - The problem with some Smart Sensor QI mounts is once you turn the car off, you can't remove the phone. Our Wireless charger is equipped with a Power Capacitor that will allow you to open and close the grips on the cradle multiple times, even after the car is powered off, which keeps the convenience of wireless charging, convenient. 
  3. DUAL USB FAST CHARGER INCLUDED - Our Wireless Charger comes with a DUAL USB Fast Charger. One port is a Qualcomm Quick Charge 3.0 which is the minimum output required to unlock the full potential and speed of a wireless charger. There is an additional Charging port to charge a secondary device. 
  4. FOREIGN OBJECT DETECTION - This safety feature detects metal objects in or on the phone case that can lead to overheating.  One classic example is when people try to use a wireless charger but still have a metal plate in the back of the phone that may have been used in the past for magnetic mounting. 
  5. PHONE COMPATIBILITY - This cradle will accommodate all phones between 2-5/8" to 3-7/8 wide and up to .75" Thick

 


Tomahawk Phone Holder

The Tomahawk Phone Holder is hands down the best spring-loaded cradle on the market. Here are a few reasons why. 

  1. ADJUSTABLE SPRING TENSION - This cradle has adjustable spring tension which allows you in increase or decrease the grip strength on your device. This also allows for easy single-handed insertion and removal of the phone, regardless of how narrow or wide it is. 
  2. INJECTION MOLDED GRIPS - You'll notice many of the metal cradles out on the market have rubber grips adhered to the inside of the cradle, which can, and will, peel off in high heat. This is a common issue with many of the competitor products. You don't have to worry about that with this cradle.  Our grips are injection molded and clip into the cradle for a fail-proof design that will last a lifetime. 
  3. DEEPER GRIPS - Our patent-pending Tomahawk® cradle features grips that are .6" deep. This accommodates most phone cases, even the big protective cases such as Otterbox Defenders and credit card style cases. 
  4. BETTER BUILT - We've reviewed all "like" holders on the market and we'll flat out say, this is built better. For starters, these style phone holders have pins that run through the housing to support the spring-loaded grip.  We use 4 Pins that are stainless steel, and a large 5mm in diameter.
    The competitors are only using 2 pins, and some measured as small as 2mm in diameter, which is a lower cost/lower quality alternative.
    We'll say it one more time. The Tomahawk is built better.
  5. PHONE COMPATIBILITY - This cradle will accommodate all phones between 2.5" and 3.6" wide and up to .6" Thick


Tablet Holder

The Tackform Tablet Spring Cradle is a super universal and reliable tablet mount holder in both commercial environments as well as for regular commuters.  

  1. COMPATIBILITY - When purchasing a tablet for yourself or your fleet it’s important to know that your purchase will work every, single, tablet. This unique spring housing design is one of the few options on the market that will hold just about any tablet out there. This includes devices with screen sizes from 7” to 18.5”. We accomplish this by bundling our spring cradle with 10 different legs to accommodate different-sized devices. The spring-loaded cradle opens a minimum of 6.25” to a max of 11.5” wide. ( For reference, an iPad 12.9 is only 8.46 on its short side and 11.04 when measured lengthwise. )
  2. DEEP GRIPS – Finding a tablet mount to fit your device is one thing, finding a tablet mount to work with your large protective case is another. Our grips are over 1.25” deep making this work with most all tablet cases out there.
  3. SUPERIOR CRADLE TO ARM CONNECTION – Our Tablet Mount has an industry-standard hole pattern on the back of it. This connection type is far superior to the competitors' tablet holders that connect to the mounting arm using a Dual-T (2T) Type of connection that is prone to failure.
  4. AUTOMOTIVE GRADE ABS – Not all plastics are created equal. We use automotive grade ABS plastic which has an additive that protects the product from breaking down from UV. (sunlight) 

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
C.S. (Bristol, US)
Perfect

This is exactly what I needed for my 16’F250. And since I don’t need four cup holders up front I didn’t mind loosing them. Fit perfectly and well made.

W
William B.

Fast Track™ Console Device AMPS Bracket | Ford Super Duty - 3rd Gen (2011 to 2016) Bracket Only - NOT Compatible with Split Bench - (P/N FT02)

J
Justin W. (Pasadena, US)
Mounts

Fits perfect! Great design and the wireless charging mount is awesome too wish I had these along time ago!

M
Matthew G. (Farson, US)
Perfect fit

I had been hoping someone would release this exact product ever since I got my super duty. I needed a mount for a radio and lighting controller and this works perfectly! I also received my order a day after placing it!

M
Michael W. (Englishtown, US)
Game Changer

I wish they would have had this a year ago! I got rid of the flimsy cup mounts and have everything at my fingertips! Best phone accessory ever