Vehicle Action Camera

GoPro Compatible Mount For Perch, Brake Or Clutch Reservoir | 3.5" Arm | Enduro Series | Metal Construction | Heavy Duty

$69.99

PERFECT for vloggers, drag racers, canyon carvers or folks with a GoPro or other Action Camera. Securely hold your camera while providing 360° of rotation....

Roll Cage Mount for GoPro and Action Cameras | Mega Clamp | 10.75" Long Modular Arm | Enduro Series

Sold Out $79.99

• Info
• More Details
• Compatibility

• The Tackform Mega Clamp Roll Cage for GoPro's and other action camera's is the pinnacle of the Tackform's Enduro Series of products. It has a quick release clamp that allows you to quickly move the product between runs for a variety of viewing angle but still had a rock steady grip on the roughest of conditions. Designed specifically to work with the built in stabilization with GoPro and other action cameras. It's rigid hold clamps firmly onto any roll cage up to from .5 inches to 2 inches in diameter. The beauty of the roll cage camera mount is the amount of real estate available for capturing unique angles and perspective while filming your runs. Mount any action camera on any bar or cage.

  Buy it now. Use it forever. Lifetime Guaranteed.

  

• Why our Roll Cage GoPro Mount? The key to quality footage at the track is all about a the angle, the perspective and crisp footage. All of these things can be achieved with the Tackform Mega Clamp. There are multiple points of articulation, two ball joints as well as 2 elbow joints making the most versatile and solid action camera mount on the market. This means at one track day you can capture loads of footage from multiple filming angles, and create videos worth watching.

   

• MEGA CLAMP ROLL CAGE GOPRO AND ACTION CAMERA MOUNT COMPATIBILITY

  The main connector on this product is a 1/4"-20 threaded screw. This is the standard connection type on most tripods that will work with a huge range of action camera. In addition to that this kit comes with two types of adapters. One is a buckle adapter that screws onto the built in 1/4"-20s screw. This buckle is built to the GoPro spec. This has become a common connector type and offered by a whole array of other action cameras on the market. When using the buckle be sure to use the rubber locking plug that typically comes standard with your camera. This is a great solution if your looking for a quick release solution for you camera. In addition to that we supply a milled aluminum 2-prong adapter standard to GoPro. This adapter also can be screwed on to the 1/4"-20 threaded screw equipped on the mega clamp mount. Here's some of the common camera that will work with this roll cage action camera mount for your GoPro.

  All GoPro's including...

  GoPro Hero

  GoPro Session

  Garmin Virb

  SJCAM SJ4000

  SJCAM SJ5000X Elite 4K

  Muvi veho K-Series K-2 Pro 4K

  Xcel 1080C

  Vivitar HD

  ACTIVEON CX Gold

  Discovery Kids Photo & Video Adventure Camera

  Kyocera / Yashica YAC-400

  AEE ACE S70 Black 16MP 2"

  AKASO EK7000 4K WIFI Sports

  AEDILYS 4K WIFI Sports

  Lightdow LD4000 1080P HD

  WiMiUS Q2 Black 1080P Wifi

  Vtin 4k

  Vtin WiFi

Roll Cage Mount for GoPro and Action Cameras | Mega Clamp | 7" Medium Modular Arm | Enduro Series

Sold Out $69.99

This roll cage ready GoPro and Action camera mount is the most rugged versatile roll cage mount on the market today. It can clamp on...

Roll Cage Mount for GoPro and Action Cameras | Mega Clamp | Enduro Series

Sold Out $59.99

This roll cage ready GoPro and Action camera mount is the most rugged versatile roll cage mount on the market today. It can clamp on...

Roll Cage / Tube Frame GoPro Compatible Mount | 1.75" Clamp | Articulating 4.5" Arm | Enduro Series

$69.99

Locking Roll Bar Clamp - With safety in mind, we have designed this product with a fail proof all metal mounting clamp that safely and...

Headrest Camera Mount | 10.75" Modular Omni-Directional Arm | Locking Headrest Clamp | Enduro Series

$54.99

• Info
• Compatibility
• Installation

•  

  Headrest camera mount

  The Tackform Enduro Headrest Camera Mount is a heavy duty solution for mounting a number of different type cameras in a vehicle with headrest posts. This solution is great for Vloggers, Car Review videos, dashcam replacement or even for a baby monitor! The standard tripod (1/4-20) screw is an industry standard and isn't limited to cameras. Any device that accommodates that screw will work on this mount! Finally, two omni-directional ball heads as well as two locking elbows, allows for infinite adjustment to suit your specific needs!

   

• This mount can securely clamp to any headrest posts measuring from 3/8" to 1/2" in diameter. Included allen key tool allows for the clamp to be securely locked to the post. The arms and ball heads can be securely locked with the twist of a nut and the camera mounting screw has a convenient locking thumb screw to make sure that your camera is safe and secure. When fully extended, the mount measures 10.75" from ball to ball. The tripod (1/4-20) works especially well with all types of cameras such as point and shoots, mirrorless, micro 4/3 as well as many popular action cameras.

• 1. Using the included allen key, loosen the screws on the headrest clamp to remove the clamp plate.

  2. Raise the headrest, if needed, and place the headrest clamp around the post at your desired height.

  3. For best results, finger tighten all 4 screws and then use the included allen key to tighten the 4 screws.

  4. Loosen the screws for the arm and move it to your desired position.

  5. Align your camera's, or other device's, tripod hole with the screw on the mount and use the thumbscrew to securely tighten it

  Always support your device's weight when adjusting the arms! Ideally, adjust your arms to the desired location before placing your device on.

   

Headrest Mount for GoPro and Other Action Cameras | 10.75" Long Modular Arm | Enduro Series

$59.99

• Description
• Compatibility
• Installation

• • WHY PURCHASE FROM TACKFORM - Tackform, headquartered in Chicago, IL, believes that quality products should last a lifetime. In a world filled with low cost, short lived, quick fix mounting solutions, we chose to stand apart by manufacturing and selecting products designed to endure the roughest of conditions. This product is backed by TACKFORM’S 100% BULLETPROOF SATISFACTION GUARANTEE.
  • LOCKING HEADREST CLAMP - With safety in mind, we’ve designed this product with a fail proof all metal mounting clamp that safely and securely fastens to any headrest post up to .5" in diameter.
  • ROCK SOLID ADJUSTABLE ARM - An all aluminum arm equipped with dual omni-directional locking ball joints and two locking elbow joints allowas for the perfect filming angle. Arm length between ball joints is 10.75".
  • VERSATILE CAMERA MOUNT FOR GOPRO - Fully articulating, CNC machined, aluminum, camera mount for GoPro with familiar two to three prong adapter for GoPro.
  • DEVICE COMPATIBILITY - This mount works great with any device using the GoPro buckle system and can also be used with any device which uses a standard "tripod" screw (1/4-20). This includes, but isn't limited to "Point and Shoot", Mirrorless, Micro 4/3 and many of the most popular action cameras!

   

  HEADREST CAMERA MOUNT

  The Tackform Enduro Headrest Mount for GoPro and other ActionCams is a heavy duty solution for mounting various action cameras in a vehicle with headrest posts. The versatility of this mount allows it to point at the driver, any passenger, the pedals or any direction to the outside of the vehicle as well! This solution is great for Vloggers, Car Review videos, dashcam replacement and many others! The GoPro adapter allows this to work with a slew of devices that use that system. The adapter is also removable which exposes a standard tripod screw! The tripod (1/4-20) screw is an industry standard and isn't limited to cameras. Any device that accommodates that screw will work on this mount! Finally, two omni-directional ball heads as well as two locking elbows, allows for infinite adjustment to suit your specific needs!

• This mount can securely clamp to any headrest posts measuring from 3/8" to 1/2" in diameter. Included allen key tool allows for the clamp to be securely locked to the post. The arms and ball heads can be securely locked with the twist of a nut and the camera mounting screw has a convenient locking thumb screw to make sure that your camera is safe and secure. The adapter, once connected and tightened with the thumbscrew, is ready to receive any GoPro style device using the 3 prong attachment. When fully extended, the mount measures 10.75" from ball to ball. The tripod screw (1/4-20) works especially well with all types of cameras such as point and shoots, mirrorless, micro 4/3 as well as many popular action cameras.
  
  

• 1. Using the included allen key, loosen the screws on the headrest clamp to remove the clamp plate.

  2. Raise the headrest, if needed, and place the headrest clamp around the post at your desired height.

  3. For best results, finger tighten all 4 screws and then use the included allen key to tighten the 4 screws.

  4. Loosen the screws for the arm and move it to your desired position.

  5. Attach the GoPro adapter by aligning the screw hole with the screw on the mount and then tighten securely.

  Always support your device's weight when adjusting the arms! Ideally, adjust your arms to the desired location before placing your device on.

Suction Cup Mount for GoPro and Action Cameras | Enduro Series

$39.99

The Tackform Enduro suction cup mount for GoPro measures in at 3.5 inches wide providing a secure grip through the most extreme terrain. The suction...

Suction Cup Mount for GoPro or Action Cameras | 7" Medium Modular Arm | Enduro Series

$49.99

The Tackform Enduro suction cup mount for GoPro measures in at 3.5 inches wide providing a secure grip through the most extreme terrain. The suction...

Suction Cup Mount for GoPro and Action Cameras | 10.75" Long Modular Arm | Enduro Series

$59.99

The Tackform Enduro suction cup measures in at 3.5 Inches wide providing a secure grip through the most extreme terrain. The suction cups are designed...

ENDURO SERIES™ LOW PROFILE DRILL BASE ACTION CAMERA MOUNT | SHORT REACH ARM | CONNECTS TO FAMILIAR AMPS PATTERN DEVICES

$49.99

STANDARD AMPS PATTERN - 2-Hole base plate fits popular AMPS pattern devices. 48.5 mm (1.91") distance between holes, center to center. LOW PROFILE ARM -...